Siding project by Building The Home Inc. in Spruce Pine, NC

Siding Contractor · Spruce Pine, NC

Board and Batten Siding Installation in Spruce Pine, NC

Board and batten is one of the oldest siding styles in the mountains, and one of the easiest to get wrong. Building The Home Inc. installs it with the spacing and fastening it actually needs, so the wood moves the way it's supposed to.

Call (828) 385-2908 Get a Free Quote →

Board and batten looks simple — wide boards, narrow strips covering the seams — but that simplicity hides real technique. Under Siding Contractor, this is the style that fits a mountain or craftsman home best, and also the one where a rushed install shows up as cracked or cupped boards within a few seasons.

Why Spruce Pine Homeowners Choose Us for Board and Batten Siding

Board and batten wood siding has to move — it expands and contracts with humidity and temperature, and if it's fastened without room for that, it bows, cups, or cracks. The detail most installs get wrong is fastening the battens straight through the boards underneath instead of through the gap between them, which pins the wood down and fights the exact movement it needs to handle. Francisco fastens boards on one side to let them move, and sets battens to ride over the gap without locking the boards in place, the way the style has always actually been built. We're based right here in Spruce Pine, where board and batten is a real part of the local look, not a trend we install once and move on from.

Battens fastened over the gap, not through it Boards left room to move with the seasons Based in Spruce Pine, a real local look

Board and batten siding installed by Building The Home Inc. in Spruce Pine, NC

What's Included in Board and Batten Siding Installation

Board and batten starts with a weather-resistant barrier over the sheathing, then wide vertical boards installed with a level starting line so everything runs true up the wall. Narrow battens go over the seams between boards, covering the gap and keeping wind and water out while still letting the boards move behind them. We size the boards and battens to your home and the look you want — wider boards with narrower battens for a more open, modern feel, or closer spacing with wider battens for a more traditional, solid look.

Why Spacing and Fastening Actually Matter

Wood boards need a real gap between them — how much depends on the board width, but it's rarely less than an eighth of an inch and often more on wider boards — because the wood is going to expand and contract with the seasons whether the install accounts for it or not. Boards get fastened on one side only, or centered, so they can move without bowing.

✕ Batten nailed through both boards

Pins the wood in place. No room to move — leads to cupping, cracking, and fasteners working loose within a few years.

✓ Batten fastened over the gap

Boards stay free to expand and contract underneath. The way board and batten has always actually been built.

It's a small detail that makes the difference between siding that lasts decades and siding that needs attention again soon.

Board and Batten as an Accent or the Whole Home

Board and batten doesn't have to cover the entire house to work. A lot of the homes we build use it as an accent — a gable end, an entry feature, a specific wall that stands out — paired with fiber cement or another material for the rest of the exterior. Other homeowners want the full traditional look across the whole house. Either approach is a real option, and we'll talk through what fits your home's style and your budget before deciding.